HIKVISION DS-K1T500S - Page 128

Video Access Control Terminal User Manual
124
/
Single Frame (Reverse)
Play back the video file frame by frame (reversely).
Open Digital Zoom
Enable the digital zoom function. Click again to disable the function.
Tag Control
Add default (default tag name TAG) or custom tag (customized tag name)
for the video file to mark the important video point. You can also edit the
tag or go to the tag position conveniently.
Accurate Positioning
Set the accurate time point to play back the video file.
Capture
Capture the picture in the playback process.
Other Capture Modes
Print Captured Picture: Capture a picture and print it.
Send Email: Capture the current picture and then send an Email
notification to one or more receivers. The captured picture can be
attached.
Custom Capture: Capture the current picture. You can edit its name and
then save it.
/
Start/Stop Recording
Start/Stop the manual recording. The video file is stored in the PC.
Download
Download the video files of the camera and the video files are stored in
the PC. You can select to download by file or by date.
Enable/Disable Audio
Click to enable/disable the audio in playback.
Fisheye Expansion
Enter the fisheye playback mode.
Full Screen
Display the playback in full-screen mode. Click the icon again or press Esc
key to exit.
Downloading Video Files
During playback, you can click on the toolbar to download the video files of the camera to the local PC. You
can select to download by file, by date, or by tag.
Download by Files
Steps:
1. Click Download by Files tab in the File Download interface. You can view the video files information of
selected camera.
2. Check the checkbox of the video file and the total size of the selected files will be shown below.
3. Click Download to start downloading the file to the local PC.
You can input the flow (0 to 32768 kbps) and click Set to control the downloading speed.
4. Optionally, you can click Stop to stop downloading manually.