Video Access Control Terminal User Manual
20
Open the Account Management page.
Open the Event Management page.
Open the Log Search page.
Enter Control Panel interface.
Search Access Control
Permission
Search the added access control permission.
Configure the card reader parameters.
Configure the fingerprint machine parameters.
Configure the storage server parameters.
Enter the System Configuration page.
Enter the People Counting page.
Apply the settings on the client to the corresponding
access control device.
Set the arming status of access control devices.
Click to open the User Manual; you can also open the
User Manual by pressing F1 on your keyboard.
Select the language for the client software and reboot
the software to activate the settings.
View the basic information of the client software.
The iVMS-4200 Access Control Client is composed of the following function modules:
The Device Management module provides adding, editing,
and deleting of access controllers.
The Person Management module provides adding, editing,
and deleting of person and departments.
The Card Management module provides adding, editing,
and deleting the card information.
The Template module provides adding, deleting, and
editing of duration, week plan, and holiday.
Access Control
Permission
The Access Control Permission module provides adding,
deleting, and applying the access control permissions.
The Advanced Function module provides configuration of
advanced functions including access control type,
anti-passing back, multiple interlocking, etc..
The Linkage Configuration module provides event alarm,
event card, and client linkage configuration.
The Attendance Configuration module provides shift
schedule settings including attendance rule, attendance
check point, holiday schedule, etc.
The Attendance Statistics module provides calculating and
analyzing the attendance results.
To Next Page
Loading...
