Video Access Control Terminal User Manual
34
Setting Security
Steps:
1. Click System -> Security.
2. Select the encryption mode in the dropdown list. You are able to select Compatible Mode or Encryption
Mode.
3. (Optional) You can check Enable SSH or Enalbe Illegal Login Lock in the Software part.
4. Click Save to save the settings.
Configuring Network Parameters
Click Network -> General. You can configure the NIC type, the IPv4 address, the subnet mask (IPv4), the default
gateway (IPv4), MTU address, the MTU, and the device port. Click Save to save the settings.
To Next Page
Loading...
