Video Access Control Terminal User Manual
41
2. Select a camera in the drop-down list.
3. Set the camera video parameters, including the stream type, the bitrate type, the video quality, the frame
type , the I frame type, the video encoding type, the video type, the bitrate, the resolution, the frame rate
and the audio encoding type.
4. Click Save to save the settings.
Or click Copy to… to copy the parameters to other cameras.
Configuring Video Image Parameters
You can set the camera mode, brightness, contrast, saturation, hue, and sharpness.
Steps:
1. Click Image -> Image Settings.
To Next Page
Loading...
