Video Access Control Terminal User Manual
54
The person information, including person details, person’s fingerprint information (if configured), and the
linked card (if configured), will be imported to the selected department.
After getting the person information, if the person has issued card, the card information will be added to the
Card Managment module of the client as well.
If the person name stored in the device is empty, the person name will be filled with the issued card No.
after importing to the client.
The gender of the persons will be Male by default.
Importing Person Picture
After adding the person information to the client, you can also import person picture to the client in batch.
Before you start:
The person pictures to import should be named after the corresponding person No. As a result, you can export
the persons information to get the No. of the persons first.
After naming the pictures after the person No., you can import the pictures in batch.
Steps:
1. Click Import Picture button to pop up the Import Picture dialog box..
2. Click to select the package with person pictures and click OK to start importing.
Notes:
The picture name should be the same with the person’s person No..
Each picture should be less than 2 MB and should be in .jpg format.
The package file should be .zip file.
The package file should be less than 100 MB.
Card Operation
After adding the person and card, you can select the person and click in the Card field for further operation
such as issuing card, changing card No., , reporting card loss, card replacement, and returning card.
To Next Page
Loading...
