Video Access Control Terminal User Manual
76
2. Select the permission type.
By Person: You can select people from the list to enter/exit the door.
By Department: You can select departments from the list to enter/exit the door. Once the permission is
allocated, all the people in this department will have the permission to access the door.
By Access Control Point: You can select doors from the door list for people to enter/exit.
By Door Group: You can select groups from the door list for people to enter/exit. The permission will
take effect on the door in this group.
Note: The Door Group Permission will be available after the door group is added. For details about the
door group, refer to 3.2 Door Group Management.
3. Click Next to enter the Permission Settings interface.
4. Click on the dropdown menu to select a schedule template for the permission.
Note: The schedule template must be configured before any permission settings. You can click Add Template
button to add the schedule template. Refer to 4.3 Schedule Template for details.
5. Select people/department and corresponding doors/door groups from the appropriate lists.
6. Click Finish button to complete the permission adding.
7. (Optional) You can double click Template column of the added permission in the list to edit its permission
To Next Page
Loading...
