HIKVISION DS-K1TA70 Series

Figure 9-5 Take a Photo via Client
7.
Conrm to add the person.
-
Click Add to add the person and close the Add Person window.
-
Click Add and New to add the person and
connue to add other persons.
9.4.6 Collect Face via Access Control Device
When adding person, you can collect the person's face via access control device added to the client
which supports facial recognion funcon.
Steps
1.
Enter Person module.
2.
Select an
organizaon in the organizaon list to add the person and click Add.
Note
Enter the person's basic informaon rst. For details about conguring person's basic
informaon, refer to Congure Basic Informaon .
3.
Click Add Face in the Basic Informaon panel.
4.
Select Remote
Collecon.
5.
Select an added access control device or the enrollment staon from the drop-down list.
DS-K1TA70 Series Face Recognion Terminal User Manual
120