HIKVISION DS-K1TA70 Series

Figure 7-10 Disable Aendance Mode
Set the Aendance Mode as Disable.
You will not view or
congure the aendance status on the inial page. And the system will follow
the aendance rule that congured on the plaorm.
7.9.2 Set Manual
Aendance via Device
Set the aendance mode as manual, and you should select a status manually when you take
aendance.
Before You Start
Add at least one user, and set the user's authencaon mode. For details, see User Management.
Steps
1.
Tap T&A Status to enter the T&A Status page.
2.
Set the
Aendance Mode as Manual.
DS-K1TA70 Series Face Recognion Terminal User Manual
56