EasyManua.ls Logo

HIKVISION DS-K1TA70 Series

HIKVISION DS-K1TA70 Series
227 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The distance percentage from the face le side to the le margin in the recognion area.
The actual distance percentage should be larger than the congured value when face picture
authencaon. Other percentages, distances, and angles should also meet their condions.
Margin (Right)
The distance percentage from the face right side to the right margin in the recognion area.
The actual distance percentage should be larger than the congured value when face picture
authencaon. Other percentages, distances, and angles should also meet their condions.
Margin (Top)
The distance percentage from the face top side to the top margin in the recognion area.
The actual distance percentage should be larger than the congured value when face picture
authencaon. Other percentages, distances, and angles should also meet their condions.
Margin (Boom)
The distance percentage from the face boom side to the boom margin in the recognion
area.
The actual distance percentage should be larger than the congured value when face picture
authencaon. Other percentages, distances, and angles should also meet their condions.
Pupillary Distance
The minimum resoluon between two pupils when face recognion.
The actual resoluon should be larger than the congured value.
Score
The device will score the captured picture according to the yaw angle, pitch angle, and
pupillary distance. If the score is less than the
congured value, face recognion will be failed.
You can set the face picture parameters when authencang.
4.
Click Save.
9.14.15
Congure Supplement Light Parameters
You can turn on or o the supplement light. You can also adjust the supplement light brightness.
Steps
1.
Click Maintenance and Management → Device to enter the device list.
2.
Click
to enter the remote conguraon page.
3.
Click Other → Supplement Light Parameters to enter the Conguring Supplement Light
Parameters page.
4.
Select a supplement light type from the drop-down list.
5.
Select a supplement light mode from the drop-down list.
6.
Oponal: Set the supplement light brightness.
7.
Click Save to save the sengs.
DS-K1TA70 Series Face Recognion Terminal User Manual
203

Table of Contents

Related product manuals