HIKVISION DS-K1TA70 Series

Set Audio Parameters
Click Conguraon → Video/Audio → Audio .
Set the audio stream type and audio encoding.
You can also drag the block to adjust the device input and output volume.
Click Save to save the
sengs aer the conguraon.
Note
The funcons vary according to dierent models. Refers to the actual device for details.
8.5.14 Customize Audio Content
Customize the output audio content when authencaon succeeded and failed.
Steps
1.
Click
Conguraon → Video/Audio → Prompt .
Figure 8-8 Customize Audio Content
2.
Set the appellaon.
3.
Enable the funcon.
4.
Set the me duraon when authencaon succeeded.
DS-K1TA70 Series Face Recognion Terminal User Manual
82