HIKVISION DS-K1TA70 Series

Note
●
For each access control point (door), up to four authencaon groups can be added.
●
For the authencaon group of which authencaon type is Local Authencaon, up to 8
person/card groups can be added to the authencaon group.
●
For the
authencaon group of which authencaon type is Local Authencaon and Super
Password or Local
Authencaon and Remotely Open Door, up to 7 person/card groups can
be added to the
authencaon group.
7.
Click Save.
9.7.4 Congure Card Reader Authencaon Mode and Schedule
You can set the passing rules for the card reader of the access control device according to your
actual needs.
Steps
1.
Click Access Control → Advanced
Funcon → Authencaon to enter the authencaon mode
conguraon page.
2.
Select a card reader on the le to congure.
3.
Set card reader authencaon mode.
1) Click Conguraon.
DS-K1TA70 Series Face Recognion Terminal User Manual
144