HIKVISION DS-K1TA70 Series

Steps
1.
Click Conguraon → Network → Advanced → HTTP Listening .
2.
Edit the desnaon IP or host name, URL and port.
3.
Oponal: Click Test to test whether the entered IP address or host name are valid.
4.
Oponal: Click Default to reset the desnaon IP or host name.
5.
Click Save.
8.5.13 Set Video and Audio Parameters
Set the image quality, resoluon, and the device volume.
Set Video Parameters
Click Conguraon → Video/Audio → Video .
Figure 8-7 Video Sengs Page
Set the stream type, the video type, the bitrate type, the frame rate, the Max. bitrate, the video
encoding, and I Frame Interval.
Click Save to save the
sengs aer the conguraon.
DS-K1TA70 Series Face Recognion Terminal User Manual
81