To Next Page

To Previous Page

Note

The device should support zone funcon.

Access Point

The door status of open, close, remain open, or remain closed will be triggered.

Audio Play

The audio prompt will be triggered. And the select audio index related audio content will be

played according to the

congured play mode.

Click Save.

Oponal: Aer adding the device linkage, you can do one or more of the followings:

Delete Linkage

Sengs

Select the congured linkage sengs in the device list and click Delete to

delete it.

Edit Linkage

Sengs

Select the congured linkage sengs in the device list and you can edit its

event source parameters, including event source and linkage target.

9.9 Door Control

In Monitoring module, you can view the real-me status of the doors managed by the added

access control device. You can also control the doors such as open/close the door, or remain the

door open/closed via the client remotely. The

real-me access event are displayed in this module.

You can view the access details and person details.

Note

For the user with door control permission, the user can enter the Monitoring module and control

the door. Or the icons used for control will not show. For seng the user permission, refer to

Person Management .

9.9.1 Control Door Status

You can control the status for a single door, including opening door, closing door, remaining the

door open, and remaining the door closed.

Steps

Click Monitoring to enter the status monitoring page.

Select an access point group on the upper-right corner.

Note

For managing the access point group, refer to Group Management in the user manual of the

client soware.

The doors in the selected access control group will display.

DS-K1TA70 Series Face Recognion Terminal User Manual

159

HIKVISION DS-K1TA70 Series User Manual

Questions and Answers: