HIKVISION DS-K1TA70 Series

5.
Route the cable through the cable hole of the mounng plate, and connect to corresponding
external devices' cables.
6.
Align the device with the mounng plate and hang the device on the mounng plate.
Figure 3-6 Install Device
7.
Use 2 supplied screws (SC-M4×14.5TP10-SUS) to secure the device and the mounng plate.
Note
When the screw's head is beneath the device surface, the device is secured.
DS-K1TA70 Series Face Recognion Terminal User Manual
11