HIKVISION DS-K1TA70 Series - Page 90

Figure 8-5 Upgrade and Maintenance Page
Click Reboot to start reboot the device.
Restore Parameters
Click Conguraon → System → Maintenance → Upgrade & Maintenance .
Default
The device will restore to the default sengs, except for the device IP address and the user
informaon.
Restore All
All parameters will be restored to the factory sengs. You should acvate the device before
usage.
Import and Export Parameters
Click Conguraon → System → Maintenance → Upgrade & Maintenance .
Export
Click Export to export the logs or device parameters.
Note
You can import the exported device parameters to another device.
Import
Click and select the le to import. Click Import to start import conguraon le.
Upgrade
Click Conguraon → System → Maintenance → Upgrade & Maintenance .
DS-K1TA70 Series Face Recognion Terminal User Manual
74