HIKVISION DS-KH9510-WTE1(B) - Page 59

Volume Input and Output
Steps
1. Click Volume Input/Output to enter the volume input and output page.
Figure 3-13 Volume Input and Output
2. Slide the slider to adjust the volume input, volume output and talk volume.
3. Click Save to enable the
sengs.
Ring Import
Steps
1. Click Ring Import to enter the ring conguraon page.
Figure 3-14 Ring Import
2. Click + to add the ring, and click x to delete the imported ring.
Note
●
The ring to be imported should be in the wav format, and the size of the ring
cannot be larger than 300k.
●
Up to 4 rings can be added.
Video Intercom 9 Series Indoor Staon Conguraon Guide
48