Mobile Video Recorder User Manual
6
3.1.2 Add IP Camera
You can add the activated IP cameras.
Before You Start
Make sure the device and the camera to add are in the same network segment.
Steps
1. Go to Configuration → System → Camera Management.
2. Optional: If the device and the camera are in different network segments, modify IP camera
address.
1) Check the IP camera and click Modify.
2) Enter IP Address and Password.
3) Click OK.
3. Add IP camera.
– For the camera with the same password of the device:
1. Check the camera.
2. Click Quickly Add to add it automatically.
– For the camera with different password of the device:
1. Click Add.
2. Enter IP camera information.
3. Click OK.
Figure 3-1 Add IP Camera
Note
● Select the protocol supported by the camera.
● If no protocol is supported, click Custom Protocol to configure the main stream and
sub-stream. Then select the configured custom protocol to add the IP camera.
Result
The status of the successfully added camera is online.
To Next Page
Loading...
