HIKVISION DS-MP5 Series User Manual

Mobile Video Recorder User Manual
17
– Debug Interface: Used to debug the device.
– Rear Interface: Used to connect to network cameras.
4. Enter IPv4 Address, IPv4 Subnet Mask, and IPv4 Default Gateway.
5. Optional: To access the device via internet, configure DNS server IP address.
6. Click Save.
4.1.4 Set Port
Go to Configuration → Network → Basic Settings → Port to set the following parameters.
HTTP Port
To access the device via web browser.
RTSP Port
To get stream.
Server Port
To access the device via client software.
4.1.5 Configure DDNS
If the external network is a dynamic IP address, you can use the Dynamic Domain Name Server
(DDNS) for network access.
Before You Start
● Register your device on the DDNS server.
● Configure local network IP address, subnet mask, gateway, and DNS server.
● Create port mapping.
Steps
1. Go to Configuration → Network → Basic Settings → DDNS.
Figure 4-3 Configure DDNS
2. Select DDNS Type.

HIKVISION DS-MP5 Series Specifications

General

Brand	HIKVISION
Model	DS-MP5 Series
Category	DVR
Language	English