Mobile Video Recorder User Manual
39
7. Optional: Click Copy to and select desired channel(s) to copy the above settings to other alarm
input(s).
8. Click Save.
9.5 Configure Alarm Output
Configure the arming schedule, alarm dwell time, and alarm name for alarm output.
Before You Start
Connect an alarm device to your device.
Steps
1. Go to Configuration → Event → Basic Event → Alarm Output.
Figure 9-2 Configure Alarm Output
2. Select Alarm Output No. and enter Alarm Name.
3. Select Delay to set dwell time.
Alarm output will continue for the set time.
4. Configure arming schedule. For detailed steps, refer to "Configure Arming Schedule".
5. Optional: Click Manual Alarm to trigger alarm manually. Click Stop Alarm to stop manual alarm.
6. Optional: Click Copy to and select desired channel(s) to copy the above settings to other alarm
output(s).
7. Click Save.
To Next Page
Loading...
Need help?
General