HIKVISION DS-MP5 Series - Configure Audio Parameters; Image Settings; Set Mirror Type; Restore Default Parameters

Mobile Video Recorder User Manual
31
7.2 Configure Audio Parameters
You can configure the audio encoding format.
Before You Start
The device supports embedded audio or peripheral audio device has been connected.
Steps
1. Go to Configuration → Video/Audio → Audio.
2. Select Analog Channel Audio Coding and Intercom Audio Coding.
3. Click Save.
7.3 Image Settings
7.3.1 Set Image Parameters
You can adjust image parameters including brightness, contrast, etc.
Steps
1. Go to Configuration → Image → Display Settings.
2. Select Channel No.
3. Select Scene according to actual situation.
4. Adjust image parameters as desired.
7.3.2 Set Mirror Type
You can enable mirror image and set mirror type to get suitable image.
Steps
1. Go to Configuration → Image → Display Settings.
2. Select Mirror Type as desired.
Note
The function varies with device models.
7.3.3 Restore Default Parameters
You can restore image parameters to defaults.
Go to Configuration → Image → Display Settings, select Channel No., and click Default.