HIKVISION DS-MP5 Series - Configure Video Loss Alarm; Configure Video Tampering Alarm; Configure Alarm Input

Mobile Video Recorder User Manual
38
1) Click Draw Area.
2) In preview area, drag to draw the detection area.
3) Click Stop Drawing.
4. Configure arming schedule. For detailed steps, refer to Configure Arming Schedule.
5. Configure linkage method. For detailed steps, refer to Configure Linkage Actions.
6. Set Sensitivity.
7. Click Save.
9.4 Configure Alarm Input
Configure alarm input, including trigger level, arming schedule, alarm linkage actions, etc.
Before You Start
Connect an alarm device to your device.
Steps
1. Go to Configuration → Event → Basic Event → Alarm Input.
Figure 9-1 Configure Alarm Input
2. Select Alarm Input No. and enter Alarm Name.
3. Select Alarm Type according to alarm device type.
4. Check Enable Alarm Input Handling.
5. Configure arming schedule. For detailed steps, refer to "Configure Arming Schedule".
6. Configure linkage method. For detailed steps, refer to "Configure Linkage Actions".