HIKVISION DS-TCG406-E - Page 52

Wide Dynamic Range (WDR) can be used when there is a high contrast of the bright area
and the dark area of the scene.
Select WDR Switch and set corresponding parameters according to your needs.
On
Set WDR Level. The higher the level is, the higher the WDR strength is.
Time
Enable WDR according to the set
me period and level.
Brightness
Set Light Threshold and WDR Level. When the brightness reaches the threshold, WDR
will be enabled.
Iris Mode
Select the iris mode as manual or auto.
Brightness Enhancement at Night
The scene brightness will be enhanced at night automacally.
Enable Defog
Enable defog to get a clear image in foggy days.
Light Compensaon on License Plate
Check it. The plate brightness compensaon can be realized, and various light supplement
condions can be adapted via seng license plate expectant brightness and supplement
light
correcon coecient. The higher the sensivity is, the easier this funcon can be
enabled.
Enable Gamma Correcon
The higher the gamma correcon value is, the stronger the correcon strength is.
Black and White Mode at Night
When ICR is in night mode, you can check it to keep the video in black and white mode.
Video
Brightness
It refers to the brightness the image.
Contrast
It refers to the contrast of the image. Set it to adjust the levels and permeability of the
image.
Shuer
If the shuer speed is quick, the details of the moving objects can be displayed beer. If
the
shuer speed is slow, the outline of the moving objects will be fuzzy and trailing will
appear.
Gain
Intelligent Entrance ANPR Camera User Manual
44