HIKVISION DS-TCG406-E - Set Record Schedule

3.
Click Save.
What to do next
Format the memory card aer the sengs.
7.3 Set Record Schedule
Set record schedule to record video automacally during congured me periods.
Before You Start
Install the storage card.
Steps
1.
Go to
Conguraon → Storage → Schedule Sengs → Record Schedule .
2.
Oponal: Enable the recording overwring.
When the storage is full, the earliest videos will be overwrien.
3.
Enable the record schedule.
Figure 7-7 Set Record Schedule
4.
Select Record Type.
5.
Drag the cursor on the
me bar to set a recording me.
Note
Up to 8 me periods can be set on a me bar.
6.
Adjust the recording me.
-
Click a set recording period and enter the start me and end me in the pop-up window.
Intelligent Entrance ANPR Camera User Manual
39