HIKVISION DS-TCG406-E - 13.9 Export Parameters; 13.10 Import Configuration File

2.
Check the service(s) according to your needs.
Note
The supported services vary with dierent models. The actual device prevails.
mulProtocolUpload
Enabled
The captured informaon will upload to all the connected plaorms (such as the FTP, arm
host, listening, etc.) without priority.
noPlateFilter Enabled
The vehicles without license plates will not be captured.
Filter Checkpoint Capture of Same Vehicle
It is used to debug the device with the same vehicle. When the same vehicle is triggered
many
mes during a short period in the scene, the checkpoint pictures of the vehicle will not
be captured.
3.
Click Save.
13.9 Export Parameters
You can export the parameters of one device, and import them to another device to set the two
devices with the same parameters.
Steps
1.
Go to
Conguraon → System → Maintenance → Upgrade & Maintenance → Data Export .
2.
Click Export aer Conguring Parameters.
3.
Set an encrypon password, conrm the password, and click OK.
Note
The password is used for imporng the conguraon le of the current device to other devices.
4.
Select the saving path, and enter the le name.
5.
Click Save.
13.10 Import
Conguraon File
Import the conguraon le of another device to the current device to set the same parameters.
Before You Start
Save the conguraon le to the computer.
Steps
Cauon
Imporng conguraon le is only available to the devices of the same model and same version.
Intelligent Entrance ANPR Camera User Manual
70