HIKVISION DS-TCG406-E - 9.2.2 Connect to OTAP; 9.2.3 Connect to Hik-Connect

7.
Oponal: View Register Status.
What to do next
When the registraon status shows online, you can add or manage the device via the plaorm
soware.
Refer to its corresponding manual for details.
9.2.2 Connect to OTAP
The device can be accessed to the maintenance plaorm via OTAP protocol, in order to search and
acquire device informaon.
Before You Start
Ensure the device can communicate with the
plaorm normally.
Steps
1.
Go to Conguraon → Network → Data Connecon → OTAP .
2.
Check Enable.
Figure 9-3 Connect to OTAP
3.
Set corresponding parameters.
Note
The device ID should be the same with the added one on the OTAP plaorm.
4.
Click Save.
What to do next
When the registraon status is online, you can add or manage the device via the plaorm
soware. Refer to its corresponding manual for details.
9.2.3 Connect to Hik-Connect
The device can be remotely accessed via Hik-Connect.
Intelligent Entrance ANPR Camera User Manual
52