HIKVISION DS-TCG406-E - 5.1.7 Start;Stop Two-Way Audio; 5.1.8 Enable;Disable Audio; 5.1.9 Enable Digital Zoom; 5.1.10 Enable Regional Focus

The area will be zoomed in.
4.
Click any posion of the image to restore to normal image.
5.
Click to disable digital zoom.
5.1.10 Enable Regional Focus
Steps
1.
Click .
2.
Drag the cursor from the upper le corner to the lower right corner to select the area that needs
to be focused.
Result
The selected area is focused.
5.1.11 Select Video Mode
Set the video mode when adjusng the device focus during construcon.
Click and select when the device is running normally.
5.2 PTZ
Operaon
Click Live View. Click and click to show the PTZ control panel.
Figure 5-1 Control Panel
Table 5-1 Buon Descripon
Buon Descripon
/ Zoom + and Zoom -
●
Hold to zoom in the scene.
●
Hold to zoom out the scene.
/ Focus + and Focus -
Intelligent Entrance ANPR Camera User Manual
27