HIKVISION DS-TCG406-E - 3.1.2 Adjust Image Settings

3.1.2 Adjust Image
You can adjust the posions of the lane line, lane right limit, and trigger line, and adjust the lens if
the lens is vari-focal lens.
Steps
1.
Go to Quick
Conguraon → Image Adjustment .
Figure 3-2 Adjust Image
2.
Set Supplement Light Parameters.
I/O Output Mode
Constant Light Mode: The supplement light is constantly on to supplement light for the
scene.
Enable Mode
Default
The default status of the supplement light depends on the device models.
Time Schedule
Intelligent Entrance ANPR Camera User Manual
8