HIKVISION DS-TCG406-E - 12.7 Set Timeout Logout; 12.8 Set Password Validity Period

12.7 Set Timeout Logout
You can improve network access security by seng meout logout.
Steps
1.
Go to
Conguraon → System → Security → Security Service → Timeout Logout .
2.
Enable meout logout for stac page.
3.
Set Max. Timeout.
4.
Click Save.
Result
When the page
stac me exceeds the set me, the device will automacally log out.
12.8 Set Password Validity Period
You can improve network access security by seng password validity period.
Steps
1.
Go to Conguraon → System → Security → Security Service → Password Validity Period .
2.
Select Validity Type.
-
Select Permanent. The password will be permanently valid.
-
Select Daily and set Password Expiry Time. It will prompt you that the password is expired
according to the set password expiry me, and you need to set the new password.
3.
Click Save.
Intelligent Entrance ANPR Camera User Manual
65