HIKVISION DS-TCG406-E - 8.5 Set OSD (On-Screen Display)

5.
Click Save.
6.
Oponal: Select other area codes and repeat the steps above if you need to draw mulple xed
areas.
8.5 Set OSD
You can customize OSD informaon on the live view.
Steps
1.
Go to Conguraon → Video → Text Overlay on Video → Text Overlay on Video .
Figure 8-3 Set OSD
2.
Set display contents.
1) Check Camera Name.
2) Enter Camera Name.
3) Check Display Date, and set the
me and date format.
4) Enable Millisecond according to your needs.
3.
Oponal: Click Add and enter informaon if you want to add custom informaon.
Note
Up to 6 items of custom informaon can be added.
4.
Set display properes (font, color, etc.).
5.
Select Alignment.
Note
If you select Align Le or Align Right, set Min. Horizontal Margin and Min. Vercal Margin.
6.
Drag the red frames on the live view image to adjust the OSD posions.
Intelligent Entrance ANPR Camera User Manual
47