HIKVISION DS-TCG406-E - 7.2 Set Storage Quota; 7.3 Set Record Schedule

Figure 7-6 Set Cloud Storage
2.
Check Enable.
3.
Select Version.
V1.0
a. Enter IP Address and Port
b. Enter User Name and Password.
c. Enter Cloud Storage ID according to the server storage area No.
V2.0 a. Enter IP Address and Port
b. Enter accessKey and secretKey.
c. Enter Resource Pool ID according to the server storage area No. of uploading
pictures.
4.
Click Save.
7.2 Set Quota
Set the video and picture rao in the storage.
Before You Start
Install the memory card.
Steps
1.
Go to
Conguraon → Storage → Storage Management → HDD Management → HDD Quota .
2.
Set Capture Quota Rao and Video Quota Rao according to the actual needs.
Note
The percentage sum of the capture and video quota rao should be 100%.
Intelligent Entrance ANPR Camera User Manual
38