HIKVISION DS-TCG406-E - Chapter 5: Live View and Local Configuration; 5.1 Live View Functions; 5.1.1 Start;Stop Live View

Chapter 5 Live View and Local Conguraon
5.1 Live View
5.1.1 Start/Stop Live View
Click to start live view. Click to stop live view.
5.1.2 Select Image Display Mode
Click to select an image display mode.
5.1.3 Select Window Division Mode
Click to select a window division mode.
5.1.4 Select Stream Type
Click to select the stream type. It is recommended to select the main stream to get the high-
quality image when the network condion is good, and select the sub-stream to get the uent
image when the network condion is not good enough.
Note
The supported stream types vary with dierent models. The actual device prevails.
5.1.5 Capture Picture Manually
You can capture pictures manually on the live view image and save them to the computer.
Steps
1.
Click to capture a picture.
2.
Oponal: Click Conguraon → Local → Picture and Clip Sengs to view the saving path of
snapshots in live view.
5.1.6 Record Manually
You can record videos manually on the live view image and save them to the computer.
Intelligent Entrance ANPR Camera User Manual
25