HIKVISION DS-TCG406-E - 13.3 Upgrade Device Firmware; 13.4 Reboot Device; 13.5 Restore Parameters

3.
Click Search.
The matched log les will be displayed on the log list.
4.
Oponal: Click Export to save the log les to your computer.
13.3 Upgrade
Upgrade the system when you need to update the device version.
Before You Start
●
Update the plugin before upgrade.
●
Prepare the upgrade
le. If the upgrade le is a compressed package, it needs to be
decompressed into the .dav format.
Steps
1.
Go to
Conguraon → System → Maintenance → Upgrade & Maintenance → Upgrade .
2.
Click Browse to select the upgrade le.
3.
Click Upgrade.
4.
Click OK in the popup window.
Note
The upgrade process will take 1 to 10 minutes. Do not cut o the power supply.
Result
The device will reboot automacally aer upgrade.
13.4 Reboot
When the device needs to be rebooted, reboot it via the soware instead of cung o the power
directly.
Steps
1.
Go to Conguraon → System → Maintenance → Upgrade & Maintenance → Device
Maintenance .
2.
Click Reboot.
3.
Click OK to reboot the device.
13.5 Restore Parameters
When the device is abnormal caused by the incorrect set parameters, you can restore the
parameters.
Intelligent Entrance ANPR Camera User Manual
67