Specifications
96 Compella™ Bariatric Bed System Instructions for Use (178951 REV 6)
Guidance and Manufacturer's Declaration—Electromagnetic Emissions
The P7800 is intended for use in the electromagnetic environment specified below. The customer or the user of the
model P7800 should make sure it is used in such an environment.
Emissions Test Compliance Electromagnetic Environment—Guidance
RF emissions
CISPR 11
Group 1 The P7800 uses RF energy only for its internal functions. Therefore,
its RF emissions are low and are not likely to cause any interference
in nearby electronic equipment.
RF Emissions
CISPR 11
Class A The P7800 is suitable for use in all establishments other than
domestic establishments and those directly connected to the
public low-voltage power supply network that supplies buildings
used for domestic purposes.
Harmonic Emissions
IEC 61000-3-2
Class A
Voltage Fluctuations/
Flicker Emissions
IEC 61000-3-3
Complies
To Next Page
Loading...
