7.1 Using a PC Card
112
Quick Start Manual
Loading Files from a PC Card to the 3196
PC-CARD
1
LOAD
(Example)
Select the No. to load
Loading a settings file: select a file with .SET extension
Loading a measurement data file:
Select the binary format directory <DIR> (that for files
whose names begin with “B”).
• Text, BMP and file formats not supported by this instrument canno
be loaded.
• When saving in binary format, saving can take up to 5 minutes.
• Files in binary format of up to 13 MB (including up to 5 MB of time-
series data and up to 100 event data sets) can be loaded into the
3196. We recommend the use of the 9624 PQA-HiVIEW or 9624-
10 PQA-HiVIEW PRO to analyze binary format files.
Saving a Settings File to a PC Card
(from [SETTING]/[ANALYZING] modes)
PC-CARD
SAVE
SAVE
File Name Entry
The .SET file name extension is appended auto-
matically
Date and time information are recorded automati-
cally.
SETUP FILE
Only from [ANALYZING] mode
(no need to select from [SETTING] mode)
To Next Page
Loading...
