Hioki 3196 - Page 119

1
2
3
4
5
6
7
8
9
10
11
Peripheral Devices
7.1 Using a PC Card
113
Automatically Saving Measurement Data to a PC Card
Select other settings as needed
When the
[RECORDING] internal operating status is
enabled, the screen image is copied automatically
.
Setting Item Selections
MemoryFull
Continue/Stop
Interval
(select from menu)
Auto Save
BINARY(save in binary format)
TEXT(save in text format)*1
RECORDING
Data saved to internal memory is automatically
saved to a PC Card simultaneously.
Select from pull-
down menu
*1: When saving as text
Select
OFF
ON
RETURN
Select the items to be saved
The currently selected items are indicated by num
-
ber at the right side of the Auto Save display.
Select item
(Deselect)
(Select)
• In binary format, all measurement data of the 3196 can be saved t
o
a PC card.
• When data is automatically saved in text format, only time serie
s
data and event list data can be saved.