6.4 Monitoring Interruptions
84
Quick Start Manual
7.
Changing to a screen for hard copy
MONITOR
"0" is displayed when no event has occurred.
If an event occurs, the color changes to red and the count is incre-
mented.
Starts and stops in recording are classed as events. Note that when
recording starts, "Other (Ext)" changes to red and the value
becomes "1."
When TIMER or PRINTER is set by
SYSTEM-DF2-HARDWARE,
a hard copy is printed to the printer at the set interval.
Display the screen to be printed
Example: Event monitor screen
8.
Starting the recording interval
Use the same method as when measuring power fluctuation. (page 66)
To Next Page
Loading...
