Hioki DM7275-01 - Page 160

160
Functional Specications
Panel save and panel
load operation
Number of panels 30
Saved information Time and date of save, measured value display,
measurement range selection, input resistance selection,
number of display digits, integration time, smoothing, trigger
setting (measurement count, delay), NULL, temperature
compensation, scaling, contact check, comparator, BIN,
absolute value judgment, auto hold, label display, sub-display
Panel name User-dened, 10 characters
Setting NULL value save: ON, OFF
Default setting NULL value save: ON
Labeldisplay
Settings Label display: ON, OFF
Label: User-dened, 8 characters
Default settings Label display: OFF
Label: none
Measuredvaluememory
Display items 5000
Memory contents Elapsed time, voltage, temperature
Sub-display Number of data points Statistics, trend, bar graph
Default setting No sub-display
Statistics Number of data points:
Statistics calculations: 1,000,000 data points (automatic
stop)
Description of statistics:
Maximum value (index number), minimum value (index
number), maximum value - minimum value, average value,
sample standard deviation, population standard deviation,
total number of data points, number of valid data points
• When the comparator is on
Count for each judgment result, process capacity index
• When BIN is on
Count for each BIN number, “Out of BINs” count
Trend Displays data in the instrument’s measured value memory as
a trend graph.
Bar graph Displays measured values as a bar graph.
Data output Operation
• Outputs data to the USB COM, USB keyboard, RS-232C,
printer, or LAN interface.
RUN state: Inputting the TRIG signal or pressing the
[TRIG]
key causes the current measured value to be output.
Other than RUN state: Inputting the TRIG signal or pressing
the [TRIG] key causes the measured value to be output
once measurement completes.
Auto-hold setting: The measured value is output while being
held.
• Data cannot be output to the GP-IB interface.
Settings Automatic data output: ON, OFF
Output at detection: ALL, HI, IN, LO, HL
Data output format
Measurement data: V, V°C
Time and date: ON, OFF
Default settings Automatic data output: OFF
Output at detection: ALL
Measurement data: V
Time and date: OFF
w ww . . co m
information@itm.com1.800.561.8187