Hioki DM7275 Series - Page 112

110
Communications Settings
Setting the format for measurement
You can set the format used by the instrument in response to measured value queries (
:FETCh?
,
:READ?
, etc.). When using the FLOAT setting, the instrument will automatically transition to the
STOP state when transitioning to the REMOTE state.
(Measurement screen) MENU > I/F
RANGEFIX
Fixes the exponent part based on
the measurement range (default
setting).
FLOAT Uses oating-point notation.
• The output format cannot be changed using the data output function. (p. 114)
• Use the FLOAT setting if you require compatibility with an SCPI-compatible multimeter.
• For more information about the communications window, see the Communication Command
Instruction Manual on the included application disc.
Settingthemodelnameacquiredbycommands
You can set the string returned to the external device when the instrument’s model name is
acquired with a communications command (
*IDN?
). (When this parameter has not been set, the
instrument will return
HIOKI,modelname,serialnumber,softwareversion
).
(Measurement screen) MENU > I/F
1
(Default setting: Blank)
2
EnterthedesiredtextandtouchENT.
Up to 127 characters can be entered.
CLR
Deletes all
characters.
[A] Switches to
uppercase
characters.
BS Deletes the
previous
character.
[a] Switches to
lowercase
characters.
CNCL Cancels the
setting and
returns to the
previous screen.
[9]
Switches to
numerals.
<>
Moves the cursor.
[!] Switches to
symbols.
w ww . . co m
information@itm.com1.800.561.8187