Hioki DM7275 Series - X84; Displaying, Clearing, and Printing Statistical Calculation Results

85
Statistical Calculations
Displaying,clearing,andprintingstatisticalcalculationresults
DISP > STATISTICS
Example screen: When the BIN function and
comparator function are set to OFF
(The screen display varies with the BIN function
and comparator function settings. (p. 44))
PAGE1 Displays PAGE1 (displayed only
when the comparator function or
BIN function is set to ON).
PAGE2 Displays PAGE2 (displayed only
when the comparator function or
BIN function is set to ON).
CLEAR Clears the statistical calculation
results.
PRINT Prints the statistical calculation
results (displayed only when the
INTERFACE is set to PRINTER).
ScreenwhenyoutouchPAGE1
(When the comparator function is ON)
NUM Total number of data points
VAL Number of valid data points
Max
No=
Maximum value
Index number
Min
No=
Minimum value
Index number
P-P Maximum value - Minimum
value
Avg Average value
Sn Population standard
deviation
Sn-1 Sample standard deviation
Cp Process capability index
(variability)*
Cpk Process capability index
(bias)*
*Displayed only when the comparator
function is set to ON.
ScreenwhenyoutouchPAGE2
(When the comparator function is set to ON)
The count for each judgment result, the number
of measured values outside the measurement
range, and the number of errors are shown.
(When the BIN function is set to ON)
The count for each BIN number and the “Out of
BINs” count are shown.

Scrolls screen content.
6
Useful Functionality
w ww . . co m
information@itm.com1.800.561.8187