Hioki DM7275 Series - Connecting the Measurement Cables (to the Instrument)

26
Connecting the Measurement Cables (to the Instrument)
2.4 Connecting the Measurement Cables (to the
Instrument)
Before connecting the measurement cables, read “Before connecting a measurement cable”
(p. 9) carefully.
Connect the optional Hioki measurement cables to the instrument’s measurement terminals.
Use only Hioki measurement cables. See “Options (Sold Separately)” (p. 3) and “3.1
Connecting the Measurement Cables (Measurement Target)” (p. 31).
Protective cap
Eachtestleadplugsiscoveredbyaprotectivecap.
Remove this cap before use.
Plug Terminal
Red HIGH
Black LOW
Front
Voltage measurement terminals
Red
Black
Connect as follows:
w ww . . co m
information@itm.com1.800.561.8187