Hioki DM7275 Series - Setting the Measurement Range

35
Setting the Measurement Range
3.2 Setting the Measurement Range
By default, the range is set to AUTO (auto-range operation). In this setting, the range is
automatically switched to an appropriate setting. You can also x the range as desired (manual
range operation).
Settingwiththeoperationkeys Setting with the touch panel
Manual-range operation
Press the [

]keys.
Each time you press one of the keys, the range,
decimal point position, and unit will change
(indicated by the boxes below).
1
3
2
Auto-range operation
Press the [AUTO]key.
1
2
3
Auto-range operation may not stabilize for some measurement targets. In this case, set the
range manually.
3
Measurement
w ww . . co m
information@itm.com1.800.561.8187