Hioki DM7275 Series - Files

123
Files
10.7 Files
You can check the data stored on a USB ash drive on a computer. (USB ash drive contents
cannot be checked using the instrument.)
File format
Data is saved in the le format described below. The rst time a USB ash drive is inserted into the
instrument, the folder listed in the table below will be created automatically. (If the folder is deleted,
it will be created automatically the next time the drive is inserted into the instrument.)
Folder name Contents Savelename Extension
HIOKI_DM
Output measurement data
See “Outputting measurement data or
screenshots” (p. 118)
MEAS_XXX
or user-specied
lename
.CSV
Measurement data from the instrument’s
internalmemoryoutputcollectively
See “Outputting all measurement data” (p. 119).
MEM_XXX
or user-specied
lename
.CSV
Screenshot data
See “Outputting measurement data or
screenshots” (p. 118).
SCRN_XXX .BMP
Measurement condition data
See “Outputting and Loading Measurement
Conditions (USB Flash Drive)” (p. 120).
SET_XXX
or user-specied
lename
.SET
Measurement condition data and panel data
See “Outputting and Loading Measurement
Conditions (USB Flash Drive)” (p. 120).
SET_XXX
or user-specied
lename
.ALL
XXX: Sequential number from 000 to 199
Typesandnumberoflesusedbytheinstrument
• The instrument cannot display two-byte characters (Japanese, etc.). Two-byte characters will be
displayed as “??.”
• Filenames used by the instrument have 8-character lenames and 3-character extensions (for
example, “abcdefgh.csv”).
10
Using a USB Flash Drive
w ww . . co m
information@itm.com1.800.561.8187