Hioki DM7275 Series - 2 Preparing for Measurement; Preparation Process

23
2
Preparing for Measurement
2.1 Preparation Process
Before starting, read “Operating Precautions” (p. 7) carefully.
For more information about rack mounting, see “Appx. 7 Rack Mounting” (p. Appx.14).
(1) Position the instrument as desired. (p. 7).
(2) Perform the pre-measurement inspection. (p. 24).
(3) Connect the power cord. (p. 25).
(4) Connect the measurement cables to the measurement terminals. (p. 26).
(5) Connect the temperature sensor to the TEMP.SENSOR connector.
(When performing temperature measurement or using the temperature compensation function) (p. 27)
(6) Congureandconnecttheexternalinterface(asnecessary).
• Using the USB interface. (p. 98)
• Using the RS-232C interface. (p. 100)
• Using the GP-IB interface. (p. 102)
• Using the LAN interface. (p. 104)
• Using a USB ash drive (p. 115)
• Using the EXT I/O connector (p. 125)
(7) Turn on the instrument. (p. 28).
(8) Set the time and date. (p. 30).
2 Preparing for Measurement
Power cord To outlet
2
Preparing for Measurement
w ww . . co m
information@itm.com1.800.561.8187