Hioki DM7275 Series - Saving Measurement Conditions (Panel Save Function); Conditions (Panel Load Function)

62
Saving Measurement Conditions (Panel Save Function)
5.1 Saving Measurement Conditions (Panel Save
Function)
The panel save function saves the current measurement conditions in the instrument’s internal non-
volatile memory. You can select whether to save NULL values.
(Measurement screen) MENU > PANEL
1
Select a panel number.
2
3
SelectwhethertosaveNULLvalues.
Checked Saves NULL values.
Notchecked
Does not save NULL values.
4
(When saving to an unused panel number)
If you chose
OK
⇒
Proceed to Step 5.
(When saving to a panel number that has
already been used)
Touch
OK to overwrite the previously
saved data with the current measurement
conditions.
w ww . . co m
information@itm.com1.800.561.8187