Hioki DM7275 Series - X84; Switching the Measured Value Display; X84; Changing the Range

18
Operating the Instrument
Switchingthemeasuredvaluedisplay
Operationkey
Each time the key is pressed, the measured
values shown on the screen will switch between
voltage only and voltage and temperature.
Touch panel
1
2
• When measuring temperature, connect the temperature sensor to the instrument in advance.
(p. 27)
• Temperature measured values are not shown on the trend display or settings screens.
• The instrument will continue to measure temperature internally even if the temperature is not
being displayed on the screen.
• The temperature display is updated together with the voltage display.
Changing the range
See “3.2 Setting the Measurement Range” (p. 35).
Operationkeys
Causes the optimal range to be set automatically.
(Auto-range operation)
Switches the range.
Touch panel
1
2
w ww . . co m
information@itm.com1.800.561.8187