Hioki DM7275 Series - Page 89

86
Statistical Calculations
Thestatisticalcalculationresultsareautomaticallyclearedatthefollowingtimes:
• When the user clears the statistical calculation results
• When the user clears the statistical calculation results
See “If you do not wish to clear the statistical calculation results every time they are printed” (p. 86)
• When the user changes the measurement conditions (temperature compensation, scaling, NULL)
• When the user changes the comparator settings (p. 53)
• When the user changes the BIN settings (p. 57)
• When the instrument is reset (p. 93)
• When measurement conditions are loaded using the panel load function
• When the instrument is turned off (p. 28)
Printing
Touching PRINT prints the statistical calculation results.
If there is no valid data, only the number of data points will be printed. If there is one valid data
point, the sample standard deviation and process capability index will not be printed.
Ifyoudonotwishtoclearthestatisticalcalculationresultseverytimetheyare
printed
(Measurement screen) MENU > I/F
1 2
3
ON Automatically clears the statistical
calculation results every time they
are printed.
OFF Does not clear the statistical
calculation results.
(Default setting)
w ww . . co m
information@itm.com1.800.561.8187