Hioki DM7275 Series - Page 161

161
Functional Specications
Keylock
Operation When set from the front panel, all operations other than the
cancellation key are disabled.
Operation of the front panel is disabled while the KEY_LOCK
signal is being input and while a valid LOAD signal is being
input.
The [TRIG] key functions while the key lock is engaged.
Setting ON, OFF
Default setting OFF
Backlight Setting Brightness: 0% to 100% (in 10% steps)
Default setting Brightness: 80%
Clock Auto calendar, automatic detection of leap years, 24-hour format
Clock accuracy ±4 min/month
Default state 00:00, January 1, 2015
Suppliedpowersupply
frequency
Settings 50 Hz, 60 Hz, AUTO
Default setting AUTO
Output format Setting Date: YYYYMMDD, DDMMYYYY, MMDDYYYY
Date delimiter: Slash, hyphen, period
Decimal point: Period, comma
Data delimiter: Comma, semicolon, tab, space
(Setting applies to screen display, USB ash drive output,
USB keyboard output, and printer output.)
Default settings Date: YYYYMMDD
Date delimiter: Slash
Decimal point: Period
Data delimiter: Comma
Self-test ROM test, RAM test
Buzzer Settings Volume: OFF, SMALL, MEDIUM, LARGE
Key tone: ON, OFF
Auto-hold tone: ON, OFF
Error tone: ON, OFF
Default settings Volume: MEDIUM
Key tone: ON
Auto-hold tone: ON
Error tone: ON
Touchpaneladjustment
Adjusts for touch panel misalignment by setting the location of the top left and bottom
right corners of the touch panel.
The settings can be reverted to their factory defaults.
Measurement
information
Displayed information Displays instrument settings.
Communications
monitor
Operation
• Displays the data being sent and received with the LAN,
USB, RS-232C, and GP-IB interface.
• Saves sent and received commands on the USB ash drive
(log function).
Setting Communications monitor: ON, OFF
Log: ON, OFF
Default setting Communications monitor: OFF
Log: OFF
13
Specications
w ww . . co m
information@itm.com1.800.561.8187