Hioki DM7275 Series - Page 164

164
Interface Specications
RS-232C
(-03model)
Connector D-sub 9-pin male with fastening screw #4-40
Transmission method Asynchronous, full duplex
Transmission speeds 9600 bps, 19200 bps, 38400 bps
Number of data bits 8
Number of stop bits 1
Parity bit None
Delimiters Transmit: CRLF; receive: CR or CRLF
Flow control None
Protocol No control sequence
Type of information
sent and received
Settings and measurements via communications commands
Setting Transmission speed: 9600 bps, 19200 bps, 38400 bps
Default setting Transmission speed: 9600 bps
Printer
(-03model)
Supported printers Interface: RS-232C
Number of characters per line: At least 40 single-byte characters
Communications speed: 9600 bps, 19200 bps, 38400 bps (as
per RS-232C setting)
Number of data bits: 8
Parity: None
Number of stop bits: 1
Flow control: None
Delimiter: CRLF
Control codes: Must be capable of printing plain text directly.
Setting Clear statistical calculations: ON, OFF
Default setting Clear statistical calculations: OFF
w ww . . co m
information@itm.com1.800.561.8187