Hioki DM7275 Series - Page 200

Appx.20
Rack Mounting
JIS-compliant hardware
You will need: Ten M4 × 10 mm screws and four M3 × 6 mm screws
1
AttachaconnectingbrackettotheinsideofeachinstrumentwithM4×10mmscrews(total
ofsix).
2
Positiontheinstrumentssothattheconnectingbracketsarealignedandsecurethem
togetherwiththefourM3×6mmscrews(ontopandbottom).
3
Insert a spacer on the outside of each instrument (no spacers are needed where the
connectingbracketsareattached)andattachtherack-mountingbracketwiththeM4×10
mm screws (total of four).
3
1
1
2
2
3
: No screw
w ww . . co m
information@itm.com1.800.561.8187