5.1 Recording Measurement Data
1
2
3
4
5
6
7
8
9
10
11
付録
索引
115
8. Press the key to set the time.
If not using the timer, press the key.
- - min - - s appears.
9. Press the key.
The instrument returns to the standby
state, in which logging recording is avail-
able.
Procedure
10. Start insulation resistance measurement.
See 3.2 "Measuring Insulation Resistance"
(page 62 to 78)
The first data is acquired when the first
recording interval has elapsed after
measurement has started.
The time displayed is the recording interval.
To Next Page
Loading...
